CNC steel models's precautions

First, check CNC steel models mechanical performance is good, the table and the table to maintain the level bending machine; and ready for all kinds of mandrel tool block.

Second, according to the diameter and bending hoop machines installed rebar processing requirements mandrel forming axis, iron shaft gear or a variable fences, mandrel diameter should be 2.5 times the bar diameter.

Third, check the mandrel, the stopper, the turntable should be no damage and cracks, securing reliable shield, confirm normal machine operation by air before the operation.

Fourth, when the job will need to bend rebar inserted in one end of the fixed turntable with a gap, and the other end is fixed and hand pressed against the body, inspection body fixed, and indeed on the side of safety before starting block reinforcement.

Five non-replacement of jobs and change the angle of the mandrel and the governor and other operations, nor refueling or removal.

Sixth, bending steel, non-processed CNC steel models machines for the specified rebar diameter, root number and mechanical speed.

Seven high bending stiffness or low alloy steel, machinery nameplate should be a maximum limit for standard diameter, and replace the corresponding spindle.

Eight, prohibited within the operating radius of curved steel and the body does not have a fixed side stop people. Curved good semi-finished products should be stacked neatly, hooks shall not be upward.

Nine, turntable commutation, must be carried out after it stops.

Ten, the job is finished, clean up the site, maintenance CNC steel models, power lockbox